74FCT162374ETPVG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 48 |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Part Status | Active |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Min Supply Voltage | 4.5V |
| Propagation Delay | 3.7 ns |
| Quiescent Current | 500μA |
| Logic Function | D-Type |
| Number of Bits per Element | 8 |
| High Level Output Current | 24mA |
| Low Level Output Current | 24mA |
| Clock Edge Trigger Type | Positive Edge |
| Capacitance - Input | 3.5pF |
| Length | 15.9mm |
| Width | 7.5mm |
| Thickness | 2.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74FCT162374ETPVG8 Overview
The flip flop is packaged in SSOP. D flip flop is included in the Tape & Reel (TR)package. In total, it contains 2 elements. In this case, the electronic component is mounted in the way of Surface Mount. The 48pins are designed into the board. The clock edge trigger type for this device is Positive Edge. This D latch consumes 500μA quiescent current at all. 24mA is set as the high level output current. Low level output current is set to 24mA. There should be a temperature below 85°Cduring operation. A temperature above -40°Cshould be used for the operation. Initially, it requires a voltage of 4.5V as the minimum supply voltage.
74FCT162374ETPVG8 Features
Tape & Reel (TR) package
48 pins
74FCT162374ETPVG8 Applications
There are a lot of Integrated Device Technology (IDT) 74FCT162374ETPVG8 Flip Flops applications.
- Registers
- Bus hold
- Cold spare funcion
- Counters
- Shift registers
- Balanced 24 mA output drivers
- Bounce elimination switch
- Latch
- ATE
- Communications
