74FCT162823CTPACT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 56 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT162823 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 9 |
| Propagation Delay | 12.5 ns |
| Turn On Delay Time | 1.5 ns |
| Family | FCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 500μA |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 6ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 6 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Number of Output Lines | 9 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 14mm |
| Width | 6.1mm |
| RoHS Status | ROHS3 Compliant |
74FCT162823CTPACT Overview
It is embeded in 56-TFSOP (0.240, 6.10mm Width) case. Package Tape & Reel (TR)embeds it. As configured, the output uses Tri-State, Non-Inverted. In the configuration of the trigger, Positive Edgeis used. This electronic part is mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis required for its operation. Currently, the operating temperature is -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. In this case, it is a type of FPGA belonging to the 74FCT series. In total, it contains 2 elements. As a result, it consumes 500μA quiescent current. 56terminations have occurred. You can search similar parts based on 74FCT162823. The D flip flop is powered by a voltage of 5V . A 4.5pFfarad input capacitance is provided by this T flip flop. In terms of electronic devices, this device belongs to the FCTfamily of devices. There is an electronic part that is mounted in the way of Surface Mount. 56pins are included in its design. This device has the clock edge trigger type of Positive Edge. It is part of the FF/Latchesbase part number family. An electronic part with 9bits has been designed. It reaches 5.5Vwhen the supply voltage is maximal (Vsup). For normal operation, the supply voltage (Vsup) should be above 4.5V. On the basis of its reliable performance, this D flip flop is well suited for use with TAPE AND REEL. The system runs on a power supply of 5V watts. This flip flop has a total of 2ports. Its output current of 24mAallows for maximum design flexibility. It operates with 9 output lines.
74FCT162823CTPACT Features
Tape & Reel (TR) package
74FCT series
56 pins
9 Bits
5V power supplies
74FCT162823CTPACT Applications
There are a lot of Texas Instruments 74FCT162823CTPACT Flip Flops applications.
- Data transfer
- Single Down Count-Control Line
- Balanced 24 mA output drivers
- CMOS Process
- 2 – Bit synchronous counter
- ESD performance
- EMI reduction circuitry
- Event Detectors
- Shift Registers
- ESD protection
