74FCT16823CTPVCG4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Weight | 694.790113mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74FCT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Base Part Number | 74FCT16823 |
| Function | Master Reset |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 18 |
| Propagation Delay | 12.5 ns |
| Quiescent Current | 5μA |
| Turn On Delay Time | 1.5 ns |
| Family | FCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 500μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 6ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 6 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Number of Output Lines | 9 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.59mm |
| Length | 18.41mm |
| Width | 7.49mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74FCT16823CTPVCG4 Overview
56-BSSOP (0.295, 7.50mm Width)is the way it is packaged. A package named Tubeincludes it. There is a Tri-State, Non-Invertedoutput configured with it. There is a trigger configured with Positive Edge. Surface Mountis in the way of this electric part. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. A temperature of -40°C~85°C TAis used in the operation. This electronic flip flop is of type D-Type. The FPGA belongs to the 74FCT series. D latch consists of 2 elements. During its operation, it consumes 500μA quiescent energy. The number of terminations is 56. If you search by 74FCT16823, you will find similar parts. Power is provided by a 5V supply. This JK flip flop has a 4.5pFfarad input capacitance. It belongs to the family of electronic devices known as FCT. There is an electronic part mounted in the way of Surface Mount. As you can see from the design, it has pins with 56. A Positive Edgeclock edge trigger is used in this device. The part you are looking for is included in FF/Latches. An electronic part designed with 18bits is used in this application. In order for the device to operate, it requires 5V power supplies. This flip flop has a total of 2ports. For high efficiency, the supply voltage should be set to 5V. With an output current of 64mA, it is possible to design the device in any way you want. In order to operate, the chip has 9 output lines. This D latch consumes 5μA quiescent current at all.
74FCT16823CTPVCG4 Features
Tube package
74FCT series
56 pins
18 Bits
5V power supplies
74FCT16823CTPVCG4 Applications
There are a lot of Texas Instruments 74FCT16823CTPVCG4 Flip Flops applications.
- Storage registers
- Shift registers
- Instrumentation
- Data transfer
- EMI reduction circuitry
- Shift Registers
- Data Synchronizers
- Dynamic threshold performance
- Circuit Design
- Latch-up performance
