74FCT2374ATSOCTE4
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Frequency | 250MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT2374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 12mA |
| Propagation Delay | 6.5 ns |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Current - Quiescent (Iq) | 200μA |
| Current - Output High, Low | 15mA 12mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 6.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
74FCT2374ATSOCTE4 Overview
It is packaged in the way of 20-SOIC (0.295, 7.50mm Width). You can find it in the Tape & Reel (TR)package. T flip flop uses Tri-State, Non-Invertedas the output. It is configured with a trigger that uses a value of Positive Edge. Surface Mountis occupied by this electronic component. With a supply voltage of 4.75V~5.25V volts, it operates. The operating temperature is -40°C~85°C TA. It is an electronic flip flop with the type D-Type. In terms of FPGAs, it belongs to the 74FCT series. A total of 1elements are contained within it. As a result, it consumes 200μA quiescent current. A total of 20 terminations have been made. Members of the 74FCT2374family make up this object. The power source is powered by 5V. Input capacitance of this device is 5pF farads. In terms of electronic devices, this device belongs to the FCTfamily of devices. A part of the electronic system is mounted in the way of Surface Mount. There are 20pins on it. This device has Positive Edgeas its clock edge trigger type. There is a base part number FF/Latchesfor the RS flip flops. In this case, the maximum supply voltage (Vsup) reaches 5.25V. A normal operating voltage (Vsup) should remain above 4.75V. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL. It operates from 5V power supplies. The flip flop contains 2ports. With an output current of 12mA, it is possible to design the device in any way you want. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. This can be achieved at a frequency of 250MHz.
74FCT2374ATSOCTE4 Features
Tape & Reel (TR) package
74FCT series
20 pins
5V power supplies
74FCT2374ATSOCTE4 Applications
There are a lot of Texas Instruments 74FCT2374ATSOCTE4 Flip Flops applications.
- Guaranteed simultaneous switching noise level
- EMI reduction circuitry
- ATE
- Frequency Dividers
- Data Synchronizers
- Frequency division
- Dynamic threshold performance
- Balanced 24 mA output drivers
- 2 – Bit synchronous counter
- Clock pulse
