74FCT573ATSOG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 8.5 ns |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | 48mA |
| Low Level Output Current | 15mA |
| Independent Circuits | 1 |
| Height Seated (Max) | 2.65mm |
| Length | 12.8mm |
| Width | 7.6mm |
| Thickness | 2.34mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74FCT573ATSOG8 Overview
In the package SOIC, it can be found. The electronic part in this image has 8 bits. As far as this device is concerned, it has no terminations. A 5V voltage supply is required for operation. There are 20 pins on it. This electronic device is categorized as a FCT electronic device. The 20 pins are designed into it. It is mounted according to the Surface Mount method. 2 ports are available on this device. The part is in the FF/Latches subcategory. A total of 5V power supplies are needed to run it. On the basis of its reliability, this device is well suited for TAPE AND REEL. If you want to achieve high efficiency, make sure the supply voltage is at 5V. It is set to zero for the low level output current. 48mA is set as the high level output current. Operating temperatures should be below 85°C. A temperature greater than -40°C should be used for operation. The maximum supply voltage is 5.25V. The minimal supply voltage is 4.75V. The logic IC it adopts is BUS DRIVER.
74FCT573ATSOG8 Features
SOIC package
8 Bits
20 pin count
20 pins
5V power supplies
74FCT573ATSOG8 Applications
There are a lot of Integrated Device Technology (IDT) 74FCT573ATSOG8 Latches applications.
- Counting
- Registers
- Decade counting 7-segment decimal display
- Shift left register
- Parallel Input
- Display driver
- Shift right with parallel loading
- Lamp and Display (LED)
- Hammer
- High-speed logic
