74FCT574CTSOG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | BROADSIDE VERSION OF 374 |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 5.2 ns |
| Quiescent Current | 1mA |
| Turn On Delay Time | 5.5 ns |
| Family | FCT |
| Logic Function | D-Type |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -15mA |
| Low Level Output Current | 48mA |
| Clock Edge Trigger Type | Positive Edge |
| Capacitance - Input | 6pF |
| Length | 12.8mm |
| Width | 7.6mm |
| Thickness | 2.34mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74FCT574CTSOG Overview
The item is packaged in SOICcases. D latch consists of 1 elements. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. A voltage of 5V is used to power it. An electronic device belonging to the family FCTcan be found here. Electronic part Surface Mountis mounted in the way. The 20pins are designed into the board. A Positive Edgeclock edge trigger is used in this device. The part you are looking for is included in FF/Latches. The flip flop is designed with 8bits. There are 5V power supplies attached to it. The D flip flop is embedded with 2ports. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. In terms of quiescent current, it consumes 1mA . As an additional reference, you may refer to electronic flip flop BROADSIDE VERSION OF 374. -15mAis the output current at high level. It is set to 48mAfor low level output current. It is recommended that the operating temperature be lower than 85°C. It is recommended that the operating temperature is higher than -40°C. It operates with the minimal supply voltage of 4.75V. There is a maximum voltage support of 5.25V. It uses the logic IC BUS DRIVER. The T flip flop is equipped with 1functions . The D latch is equipped with 20 pins.
74FCT574CTSOG Features
20 pins
8 Bits
5V power supplies
1 Functions
20 pin count
74FCT574CTSOG Applications
There are a lot of Integrated Device Technology (IDT) 74FCT574CTSOG Flip Flops applications.
- Instrumentation
- Counters
- Latch-up performance
- Power down protection
- High Performance Logic for test systems
- Data transfer
- Memory
- Buffered Clock
- Patented noise
- Clock pulse
