74HC107DB,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2013 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | JK Type |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC107 |
| Function | Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 85MHz |
| Propagation Delay | 16 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 15 ns |
| Family | HC/UH |
| Logic Function | Flip-Flop, JK-Type |
| Current - Output High, Low | 5.2mA 5.2mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 27ns @ 6V, 50pF |
| Trigger Type | Negative Edge |
| Input Capacitance | 3.5pF |
| fmax-Min | 60 MHz |
| Clock Edge Trigger Type | Negative Edge |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HC107DB,112 Overview
It is embeded in 14-SSOP (0.209, 5.30mm Width) case. The package Tubecontains it. As configured, the output uses Differential. There is a trigger configured with Negative Edge. There is an electrical part that is mounted in the way of Surface Mount. The JK flip flop operates at 2V~6Vvolts. -40°C~125°C TAis the operating temperature. It belongs to the type JK Typeof flip flops. It is a type of FPGA belonging to the 74HC series. A frequency of 85MHzshould not be exceeded by its output. There are 14 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The object belongs to the 74HC107 family. A voltage of 5V is used to power it. A 3.5pFfarad input capacitance is provided by this T flip flop. It belongs to the family of electronic devices known as HC/UH. It is mounted in the way of Surface Mount. A total of 14pins are provided on this board. This device's clock edge trigger type is Negative Edge. Vsup reaches 6V, the maximal supply voltage. Normal operation requires a supply voltage (Vsup) above 2V. The superior flexibility of this product is achieved by using 2 circuits. For high efficiency, the supply voltage should be set to 5V. Quiescent current is consumed by the D latch in the amount of 4μA.
74HC107DB,112 Features
Tube package
74HC series
14 pins
74HC107DB,112 Applications
There are a lot of Nexperia USA Inc. 74HC107DB,112 Flip Flops applications.
- Common Clocks
- Reduced system switching noise
- Convert a momentary switch to a toggle switch
- Communications
- Power down protection
- Data Synchronizers
- Matched Rise and Fall
- Computers
- Latch
- Asynchronous counter
