74HC109DB,112
| Parameters | |
|---|---|
| Quiescent Current | 4μA |
| Turn On Delay Time | 9 ns |
| Family | HC/UH |
| Logic Function | AND, Flip-Flop, JK-Type |
| Current - Output High, Low | 5.2mA 5.2mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 30ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Clock Edge Trigger Type | Positive Edge |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | JK Type |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC109 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 81MHz |
| Propagation Delay | 15 ns |
74HC109DB,112 Overview
The flip flop is packaged in a case of 16-SSOP (0.209, 5.30mm Width). As part of the package Tube, it is embedded. In the configuration, Differentialis used as the output. This trigger is configured to use Positive Edge. It is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 2V~6V. The operating temperature is -40°C~125°C TA. There is JK Type type of electronic flip flop associated with this device. In this case, it is a type of FPGA belonging to the 74HC series. You should not exceed 81MHzin the output frequency of the device. 16terminations have occurred. The 74HC109 family contains it. It is powered from a supply voltage of 4.5V. Input capacitance of this device is 3.5pF farads. It belongs to the family of electronic devices known as HC/UH. A part of the electronic system is mounted in the way of Surface Mount. With its 16pins, it is designed to work with most electronic flip flops. The clock edge trigger type for this device is Positive Edge. In this case, the maximum supply voltage (Vsup) reaches 6V. Keeping the supply voltage (Vsup) above 2V is necessary for normal operation. To achieve this superior flexibility, 2 circuits are used. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. As a result, it consumes 4μA of quiescent current without being affected by external factors.
74HC109DB,112 Features
Tube package
74HC series
16 pins
74HC109DB,112 Applications
There are a lot of Nexperia USA Inc. 74HC109DB,112 Flip Flops applications.
- Safety Clamp
- Supports Live Insertion
- High Performance Logic for test systems
- Shift Registers
- Registers
- Bounce elimination switch
- Frequency division
- Counters
- Common Clocks
- Computing
