74HC175DB,112
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC175 |
| Function | Master Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Bits | 4 |
| Clock Frequency | 89MHz |
| Propagation Delay | 17 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 16 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max Propagation Delay @ V, Max CL | 30ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Number of Input Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2013 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
74HC175DB,112 Overview
The flip flop is packaged in a case of 16-SSOP (0.209, 5.30mm Width). D flip flop is included in the Tubepackage. Differentialis the output configured for it. It is configured with a trigger that uses a value of Positive Edge. It is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 2V~6V. Temperature is set to -40°C~125°C TA. Logic flip flops of this type are classified as D-Type. The FPGA belongs to the 74HC series. A frequency of 89MHzshould not be exceeded by its output. The element count is 1 . A total of 16terminations have been recorded. JK flip flop belongs to 74HC175 family. A voltage of 5V is used to power it. A 3.5pFfarad input capacitance is provided by this T flip flop. It belongs to the family of electronic devices known as HC/UH. It is mounted in the way of Surface Mount. There are 16pins on it. It has a clock edge trigger type of Positive Edge. It is designed with a number of bits of 4. It reaches 6Vwhen the supply voltage is maximal (Vsup). The supply voltage (Vsup) should be maintained above 2V for normal operation. For high efficiency, the supply voltage should be kept at 5V. A total of 4input lines have been provided. It consumes 8μA current.
74HC175DB,112 Features
Tube package
74HC series
16 pins
4 Bits
74HC175DB,112 Applications
There are a lot of Nexperia USA Inc. 74HC175DB,112 Flip Flops applications.
- Automotive
- Circuit Design
- Count Modes
- Bounce elimination switch
- High Performance Logic for test systems
- Safety Clamp
- Convert a momentary switch to a toggle switch
- ESD performance
- Instrumentation
- Data storage
