74HC74DR2G
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74HC74 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 5.2mA |
| Clock Frequency | 28MHz |
| Propagation Delay | 100 ns |
| Turn On Delay Time | 21 ns |
| Family | HC/UH |
| Logic Function | AND, D-Type |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 17ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74HC74DR2G Overview
14-SOIC (0.154, 3.90mm Width)is the way it is packaged. There is an embedded version in the package Tape & Reel (TR). As configured, the output uses Differential. It is configured with the trigger Positive Edge. Surface Mountmounts this electrical part. The supply voltage is set to 2V~6V. It is at -55°C~125°C TAdegrees Celsius that the system is operating. It is an electronic flip flop with the type D-Type. The FPGA belongs to the 74HC series. Its output frequency should not exceed 28MHz Hz. This process consumes 2μA quiescents. 14terminations have occurred. JK flip flop belongs to 74HC74 family. It is powered from a supply voltage of 3V. This JK flip flop has a 10pFfarad input capacitance. This D flip flop belongs to the family of HC/UH. Surface Mount mounts this electronic component. It is designed with 14 pins. It has a clock edge trigger type of Positive Edge. It is included in FF/Latches. It reaches the maximum supply voltage (Vsup) at 6V. Normally, the supply voltage (Vsup) should be kept above 2V. The superior flexibility of this circuit is achieved by using 2 circuits. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. It offers maximum design flexibility with its output current of 5.2mA. The JK flip flop is with 1 output lines to operate.
74HC74DR2G Features
Tape & Reel (TR) package
74HC series
14 pins
74HC74DR2G Applications
There are a lot of ON Semiconductor 74HC74DR2G Flip Flops applications.
- Storage registers
- Convert a momentary switch to a toggle switch
- Clock pulse
- Automotive
- Load Control
- Supports Live Insertion
- Consumer
- Parallel data storage
- ESD performance
- Cold spare funcion
