74HC93DB,118
| Parameters | |
|---|---|
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC93 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Reset | Asynchronous |
| Family | HC/UH |
| Direction | Up |
| Logic Type | Binary Counter |
| Number of Bits per Element | 4 |
| Trigger Type | Negative Edge |
| fmax-Min | 20 MHz |
| Count Rate | 108MHz |
| Height Seated (Max) | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 14-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Additional Feature | DIVIDE BY 2 AND DIVIDE BY 8 FUNCTIONS |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
74HC93DB,118 Overview
This is a device supplied in the 14-SSOP (0.209, 5.30mm Width) package. In order to configure it, it uses 14terminations. As a result of the supply voltage of 0, 5Vcan operate in a fully flexible manner. The device contains 1terminations. 14is the number of pins on all components. Tape & Reel (TR)is the packaging method used for this package. It emerges as a member of HC/UH family. Having been designed as a member of the 74HCseries, it is well suited to a variety of applications. Binary Counteris used as the logic type. A temperature of -40°C~125°Cshould be set for the operating environment. Using a Surface Mountmounting type, it is mounted. When the supply voltage is set to [0], it is able to operate with greater reliability. There are 4bits stored in each element of the array. When it comes to this electronic device, DIVIDE BY 2 AND DIVIDE BY 8 FUNCTIONS are much important features. Among its base part number [0], you will find additional parts that are related. The minimum supply voltage (Vsup) is 2V. Up to a maximum voltage of 6Vcan be supplied (Vsup).
74HC93DB,118 Features
Embedded in the 14-SSOP (0.209, 5.30mm Width) package
4 bits per element
DIVIDE BY 2 AND DIVIDE BY 8 FUNCTIONS
74HC93DB,118 Applications
There are a lot of NXP USA Inc. 74HC93DB,118 Counters & Dividers applications.
- Clocks
- Programmable binary and decade
- SQUARE ROOT
- Frequency dividing circuits
- SQUARING
- Divide-by"N" counters/frequency synthesizers
- VHF, UHF, FM, AM, etc.
- Time Out Timer for Consumer-Application Industrial Controls
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- Frequency division
