74HCT107D,653
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | JK Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT107 |
| Function | Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 66MHz |
| Propagation Delay | 16 ns |
| Turn On Delay Time | 20 ns |
| Family | HCT |
| Logic Function | Flip-Flop, JK-Type |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 4mA 4mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 36ns @ 4.5V, 50pF |
| Trigger Type | Negative Edge |
| Input Capacitance | 3.5pF |
| fmax-Min | 60 MHz |
| Clock Edge Trigger Type | Negative Edge |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74HCT107D,653 Overview
The flip flop is packaged in 14-SOIC (0.154, 3.90mm Width). D flip flop is embedded in the Tape & Reel (TR) package. It is configured with Differentialas an output. There is a trigger configured with Negative Edge. There is an electric part mounted in the way of Surface Mount. With a supply voltage of 4.5V~5.5V volts, it operates. A temperature of -40°C~125°C TAis used in the operation. It is an electronic flip flop with the type JK Type. In FPGA terms, D flip flop is a type of 74HCTseries FPGA. A frequency of 66MHzshould be the maximum output frequency. During its operation, it consumes 4μA quiescent energy. A total of 14 terminations have been made. If you search by 74HCT107, you will find similar parts. A voltage of 5V provides power to the D latch. Its input capacitance is 3.5pFfarads. In terms of electronic devices, this device belongs to the HCTfamily of devices. Electronic part Surface Mountis mounted in the way. The 14pins are designed into the board. This device has the clock edge trigger type of Negative Edge. In order to achieve its superior flexibility, 2 circuits are used. For high efficiency, the supply voltage should be set to 5V.
74HCT107D,653 Features
Tape & Reel (TR) package
74HCT series
14 pins
74HCT107D,653 Applications
There are a lot of Nexperia USA Inc. 74HCT107D,653 Flip Flops applications.
- Storage Registers
- Storage registers
- Automotive
- Dynamic threshold performance
- Data Synchronizers
- EMI reduction circuitry
- Convert a momentary switch to a toggle switch
- Safety Clamp
- Individual Asynchronous Resets
- ESCC
