74HCT112DB,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 1998 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | JK Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT112 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 64MHz |
| Propagation Delay | 19 ns |
| Turn On Delay Time | 21 ns |
| Family | HCT |
| Logic Function | AND, Flip-Flop, JK-Type |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 4mA 4mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 35ns @ 4.5V, 50pF |
| Trigger Type | Negative Edge |
| Input Capacitance | 3.5pF |
| Clock Edge Trigger Type | Negative Edge |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
74HCT112DB,112 Overview
The flip flop is packaged in a case of 16-SSOP (0.209, 5.30mm Width). As part of the package Tube, it is embedded. The output it is configured with uses Differential. The trigger it is configured with uses Negative Edge. This electronic part is mounted in the way of Surface Mount. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. -40°C~125°C TAis the operating temperature. There is JK Type type of electronic flip flop associated with this device. It is a type of FPGA belonging to the 74HCT series. You should not exceed 64MHzin the output frequency of the device. During its operation, it consumes 4μA quiescent energy. Currently, there are 16 terminations. If you search by 74HCT112, you will find similar parts. An input voltage of 5Vpowers the D latch. Its input capacitance is 3.5pFfarads. It is a member of the HCTfamily of D flip flop. In this case, the electronic component is mounted in the way of Surface Mount. There are 16pins on it. In this device, the clock edge trigger type is Negative Edge. The superior flexibility of this circuit is achieved by using 2 circuits. The supply voltage should be maintained at 5V for high efficiency.
74HCT112DB,112 Features
Tube package
74HCT series
16 pins
74HCT112DB,112 Applications
There are a lot of Nexperia USA Inc. 74HCT112DB,112 Flip Flops applications.
- Storage registers
- ESD performance
- High Performance Logic for test systems
- Data transfer
- CMOS Process
- Set-reset capability
- Control circuits
- Pattern generators
- Load Control
- ATE
