74HCT112DB,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | JK Type |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT112 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 64MHz |
| Propagation Delay | 19 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 21 ns |
| Family | HCT |
| Logic Function | AND, Flip-Flop, JK-Type |
| Current - Output High, Low | 4mA 4mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 35ns @ 4.5V, 50pF |
| Trigger Type | Negative Edge |
| Input Capacitance | 3.5pF |
| Clock Edge Trigger Type | Negative Edge |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
74HCT112DB,118 Overview
The item is packaged in 16-SSOP (0.209, 5.30mm Width)cases. It is contained within the Tape & Reel (TR)package. T flip flop uses Differentialas its output configuration. There is a trigger configured with Negative Edge. Surface Mountis in the way of this electric part. The JK flip flop operates at 4.5V~5.5Vvolts. It is at -40°C~125°C TAdegrees Celsius that the system is operating. A flip flop of this type is classified as a JK Type. This type of FPGA is a part of the 74HCT series. In order for it to function properly, its output frequency should not exceed 64MHz. 16terminations have occurred. You can search similar parts based on 74HCT112. A voltage of 5V is used to power it. Input capacitance of this device is 3.5pF farads. In terms of electronic devices, this device belongs to the HCTfamily of devices. A part of the electronic system is mounted in the way of Surface Mount. A total of 16pins are provided on this board. In this device, the clock edge trigger type is Negative Edge. To achieve this superior flexibility, 2 circuits are used. High efficiency requires the supply voltage to be maintained at 5V. As a result, it consumes 4μA of quiescent current without being affected by external factors.
74HCT112DB,118 Features
Tape & Reel (TR) package
74HCT series
16 pins
74HCT112DB,118 Applications
There are a lot of Nexperia USA Inc. 74HCT112DB,118 Flip Flops applications.
- Buffer registers
- Balanced 24 mA output drivers
- Cold spare funcion
- Differential Individual
- Automotive
- Patented noise
- Matched Rise and Fall
- Storage Registers
- Asynchronous counter
- ESCC
