74HCT112PW,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 1998 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | JK Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT112 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 64MHz |
| Propagation Delay | 19 ns |
| Turn On Delay Time | 21 ns |
| Family | HCT |
| Logic Function | AND, Flip-Flop, JK-Type |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 4mA 4mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 35ns @ 4.5V, 50pF |
| Trigger Type | Negative Edge |
| Input Capacitance | 3.5pF |
| Clock Edge Trigger Type | Negative Edge |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HCT112PW,112 Overview
16-TSSOP (0.173, 4.40mm Width)is the way it is packaged. The package Tubecontains it. There is a Differentialoutput configured with it. Negative Edgeis the trigger it is configured with. Surface Mountis in the way of this electric part. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. -40°C~125°C TAis the operating temperature. This logic flip flop is classified as type JK Type. The FPGA belongs to the 74HCT series. You should not exceed 64MHzin its output frequency. There is 4μA quiescent consumption. There are 16 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. If you search by 74HCT112, you will find similar parts. An input voltage of 5Vpowers the D latch. Input capacitance of this device is 3.5pF farads. It belongs to the family of electronic devices known as HCT. In this case, the electronic component is mounted in the way of Surface Mount. This board has 16 pins. This device has Negative Edgeas its clock edge trigger type. Its flexibility is enhanced by 2 circuits. In order to achieve high efficiency, the supply voltage should be maintained at 5V.
74HCT112PW,112 Features
Tube package
74HCT series
16 pins
74HCT112PW,112 Applications
There are a lot of Nexperia USA Inc. 74HCT112PW,112 Flip Flops applications.
- ESD protection
- Data storage
- Computing
- Circuit Design
- Digital electronics systems
- Computers
- Memory
- Count Modes
- QML qualified product
- Divide a clock signal by 2 or 4
