74HCT173D,652
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | WITH HOLD MODE |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT173 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Load Capacitance | 50pF |
| Clock Frequency | 80MHz |
| Family | HCT |
| Current - Quiescent (Iq) | 4μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6mA 6mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 4 |
| Max Propagation Delay @ V, Max CL | 40ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Propagation Delay (tpd) | 60 ns |
| fmax-Min | 60 MHz |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
74HCT173D,652 Overview
The item is packaged in 16-SOIC (0.154, 3.90mm Width)cases. You can find it in the Tubepackage. Currently, the output is configured to use Tri-State, Non-Inverted. The trigger it is configured with uses Positive Edge. This electronic part is mounted in the way of Surface Mount. With a supply voltage of 4.5V~5.5V volts, it operates. Temperature is set to -40°C~125°C TA. It is an electronic flip flop with the type D-Type. JK flip flop is a part of the 74HCTseries of FPGAs. Its output frequency should not exceed 80MHz Hz. D latch consists of 1 elements. As a result, it consumes 4μA of quiescent current without being affected by external factors. Currently, there are 16 terminations. If you search by 74HCT173, you will find similar parts. The D flip flop is powered by a voltage of 5V . A 3.5pFfarad input capacitance is provided by this T flip flop. Devices in the HCTfamily are electronic devices. A total of 16pins are provided on this board. There is a 5.5Vmaximum supply voltage (Vsup). Additionally, you may refer to the D latch's additional WITH HOLD MODE.
74HCT173D,652 Features
Tube package
74HCT series
16 pins
74HCT173D,652 Applications
There are a lot of Nexperia USA Inc. 74HCT173D,652 Flip Flops applications.
- Single Down Count-Control Line
- Memory
- Set-reset capability
- Parallel data storage
- Clock pulse
- High Performance Logic for test systems
- Common Clocks
- Bounce elimination switch
- Buffered Clock
- QML qualified product
