74HCT173N,652
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Supplier Device Package | 16-DIP |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Series | 74HCT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Type | D-Type |
| Voltage - Supply | 4.5V~5.5V |
| Function | Master Reset |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Clock Frequency | 80MHz |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 6mA 6mA |
| Number of Bits per Element | 4 |
| Max Propagation Delay @ V, Max CL | 40ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| RoHS Status | ROHS3 Compliant |
74HCT173N,652 Overview
As a result, it is packaged as 16-DIP (0.300, 7.62mm). Package Tubeembeds it. In the configuration, Tri-State, Non-Invertedis used as the output. This trigger uses the value Positive Edge. The electronic part is mounted in the way of Through Hole. A voltage of 4.5V~5.5Vis required for its operation. A temperature of -40°C~125°C TAis considered to be the operating temperature. This D latch has the type D-Type. It belongs to the 74HCTseries of FPGAs. Its output frequency should not exceed 80MHz. In total, it contains 1 elements. As a result, it consumes 4μA quiescent current. A 3.5pFfarad input capacitance is provided by this T flip flop.
74HCT173N,652 Features
Tube package
74HCT series
74HCT173N,652 Applications
There are a lot of Rochester Electronics, LLC 74HCT173N,652 Flip Flops applications.
- Circuit Design
- Parallel data storage
- Shift registers
- QML qualified product
- Memory
- ESCC
- CMOS Process
- 2 – Bit synchronous counter
- Synchronous counter
- Frequency division
