74HCT175DB,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-SSOP |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2013 |
| Series | 74HCT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 49MHz |
| Base Part Number | 74HCT175 |
| Function | Master Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Channels | 4 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 4 |
| Clock Frequency | 49MHz |
| Propagation Delay | 16 ns |
| Turn On Delay Time | 19 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 4mA 4mA |
| Number of Bits per Element | 4 |
| Max Propagation Delay @ V, Max CL | 33ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -4mA |
| Input Capacitance | 3.5pF |
| Low Level Output Current | 4mA |
| Number of Input Lines | 4 |
| Number of Output Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
74HCT175DB,112 Overview
The flip flop is packaged in 16-SSOP (0.209, 5.30mm Width). There is an embedded version in the package Tube. Currently, the output is configured to use Differential. Positive Edgeis the trigger it is configured with. This electronic part is mounted in the way of Surface Mount. A supply voltage of 4.5V~5.5V is required for operation. A temperature of -40°C~125°C TAis used in the operation. It is an electronic flip flop with the type D-Type. JK flip flop belongs to the 74HCTseries of FPGAs. Its output frequency should not exceed 49MHz Hz. In total, there are 1 elements. There is a consumption of 8μAof quiescent energy. Members of the 74HCT175family make up this object. A 3.5pFfarad input capacitance is provided by this T flip flop. There is an electronic part that is mounted in the way of Surface Mount. With its 16pins, it is designed to work with most electronic flip flops. The clock edge trigger type for this device is Positive Edge. Flip flops designed with 4bits are used in this part. 1 circuits are used to achieve its superior flexibility. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. There are 4 output lines on it. 4input lines are available for you to choose from. In this case, the high level output current is set to -4mA. A 4mAvalue is set for low-level output current. Ideally, the operating temperature should be below 125°C. Temperatures above -40°Cshould be used. It is powered by 4.5V as its minimum supply voltage. It supports a maximum supply voltage of 5.5V volts. This frequency can be achieved 49MHz. It is reported that there are 4 channels.
74HCT175DB,112 Features
Tube package
74HCT series
16 pins
4 Bits
74HCT175DB,112 Applications
There are a lot of Nexperia USA Inc. 74HCT175DB,112 Flip Flops applications.
- Computing
- Dynamic threshold performance
- 2 – Bit synchronous counter
- Frequency Dividers
- Reduced system switching noise
- Frequency division
- Patented noise
- Instrumentation
- Cold spare funcion
- Safety Clamp
