74HCT377DB,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Additional Feature | WITH HOLD MODE |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT377 |
| Function | Standard |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Bits | 8 |
| Clock Frequency | 53MHz |
| Propagation Delay | 14 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 17 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 4mA 5.2mA |
| Max Propagation Delay @ V, Max CL | 32ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Number of Input Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HCT377DB,118 Overview
The flip flop is packaged in 20-SSOP (0.209, 5.30mm Width). It is included in the package Tape & Reel (TR). There is a Non-Invertedoutput configured with it. There is a trigger configured with Positive Edge. It is mounted in the way of Surface Mount. A supply voltage of 4.5V~5.5V is required for operation. -40°C~125°C TAis the operating temperature. A flip flop of this type is classified as a D-Type. JK flip flop belongs to the 74HCTseries of FPGAs. It should not exceed 53MHzin its output frequency. The list contains 1 elements. It has been determined that there have been 20 terminations. It is a member of the 74HCT377 family. Power is supplied from a voltage of 5V volts. A 3.5pFfarad input capacitance is provided by this T flip flop. In terms of electronic devices, this device belongs to the HCTfamily of devices. Electronic part Surface Mountis mounted in the way. There are 20pins on it. This device exhibits a clock edge trigger type of Positive Edge. It is designed with a number of bits of 8. Optimal efficiency requires a supply voltage of 5V. A total of 8input lines have been provided. As a result, it consumes 8μA of quiescent current without being affected by external factors. As an additional reference, you may refer to electronic flip flop WITH HOLD MODE.
74HCT377DB,118 Features
Tape & Reel (TR) package
74HCT series
20 pins
8 Bits
74HCT377DB,118 Applications
There are a lot of Nexperia USA Inc. 74HCT377DB,118 Flip Flops applications.
- Frequency division
- ATE
- Digital electronics systems
- Modulo – n – counter
- Registers
- Memory
- Event Detectors
- Convert a momentary switch to a toggle switch
- Counters
- Common Clocks
