74HCT377N,652
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Supplier Device Package | 20-DIP |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Series | 74HCT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Type | D-Type |
| Voltage - Supply | 4.5V~5.5V |
| Function | Standard |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Clock Frequency | 53MHz |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 4mA 5.2mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 32ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| RoHS Status | ROHS3 Compliant |
74HCT377N,652 Overview
The item is packaged in 20-DIP (0.300, 7.62mm)cases. It is contained within the Tubepackage. This output is configured with Non-Inverted. It is configured with the trigger Positive Edge. There is an electrical part that is mounted in the way of Through Hole. It operates with a supply voltage of 4.5V~5.5V. It is operating at -40°C~125°C TA. This D latch has the type D-Type. In FPGA terms, D flip flop is a type of 74HCTseries FPGA. You should not exceed 53MHzin its output frequency. In total, it contains 1 elements. As a result, it consumes 8μA quiescent current. JK flip flop input capacitance is 3.5pF farads.
74HCT377N,652 Features
Tube package
74HCT series
74HCT377N,652 Applications
There are a lot of Rochester Electronics, LLC 74HCT377N,652 Flip Flops applications.
- Data Synchronizers
- Circuit Design
- Shift Registers
- Counters
- Matched Rise and Fall
- Dynamic threshold performance
- Computing
- Load Control
- Safety Clamp
- Patented noise
