74HCT377N,652
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Additional Feature | WITH HOLD MODE |
| Subcategory | FF/Latches |
| Packing Method | BULK PACK |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT377 |
| JESD-30 Code | R-PDIP-T20 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Clock Frequency | 53MHz |
| Family | HCT |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 4mA 5.2mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 32ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| fmax-Min | 60 MHz |
| Height Seated (Max) | 4.2mm |
| Length | 26.73mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
74HCT377N,652 Overview
The flip flop is packaged in a case of 20-DIP (0.300, 7.62mm). It is contained within the Tubepackage. It is configured with Non-Invertedas an output. It is configured with a trigger that uses Positive Edge. This electronic part is mounted in the way of Through Hole. The supply voltage is set to 4.5V~5.5V. The operating temperature is -40°C~125°C TA. D-Typedescribes this flip flop. It belongs to the 74HCTseries of FPGAs. It should not exceed 53MHzin its output frequency. D latch consists of 1 elements. As a result, it consumes 8μA of quiescent current without being affected by external factors. Currently, there are 20 terminations. If you search by 74HCT377, you will find similar parts. The power source is powered by 5V. A 3.5pFfarad input capacitance is provided by this T flip flop. An electronic device belonging to the family HCTcan be found here. It is part of the FF/Latchesbase part number family. It reaches the maximum supply voltage (Vsup) at 5.5V. Normally, the supply voltage (Vsup) should be kept above 4.5V. Compared to other similar T flip flops, this device offers reliable performance and is well suited for BULK PACK. There are 5V power supplies attached to it. It is also characterized by WITH HOLD MODE.
74HCT377N,652 Features
Tube package
74HCT series
5V power supplies
74HCT377N,652 Applications
There are a lot of NXP USA Inc. 74HCT377N,652 Flip Flops applications.
- Pattern generators
- ESD performance
- Matched Rise and Fall
- Shift registers
- Load Control
- Guaranteed simultaneous switching noise level
- Control circuits
- Storage Registers
- Test & Measurement
- Data storage
