74HCT534D,652
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2001 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT534 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Clock Frequency | 40MHz |
| Family | HCT |
| Current - Quiescent (Iq) | 8μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6mA 6mA |
| Max I(ol) | 0.006 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 30ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Propagation Delay (tpd) | 45 ns |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
74HCT534D,652 Overview
The package is in the form of 20-SOIC (0.295, 7.50mm Width). The package Tubecontains it. The output it is configured with uses Tri-State, Inverted. The trigger it is configured with uses Positive Edge. Surface Mountis occupied by this electronic component. A voltage of 4.5V~5.5Vis required for its operation. Currently, the operating temperature is -40°C~125°C TA. D-Typedescribes this flip flop. In FPGA terms, D flip flop is a type of 74HCTseries FPGA. Its output frequency should not exceed 40MHz Hz. The element count is 1 . It consumes 8μA of quiescent current without being affected by external factors. The number of terminations is 20. This D latch belongs to the family of 74HCT534. An input voltage of 5Vpowers the D latch. Its input capacitance is 3.5pFfarads. HCTis the family of this D flip flop. The RS flip flops belongs to FF/Latches base part number. It reaches 5.5Vwhen the supply voltage is maximal (Vsup). Normally, the supply voltage (Vsup) should be kept above 4.5V. In order for the device to operate, it requires 5V power supplies. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.
74HCT534D,652 Features
Tube package
74HCT series
5V power supplies
74HCT534D,652 Applications
There are a lot of NXP USA Inc. 74HCT534D,652 Flip Flops applications.
- Bus hold
- Computing
- Guaranteed simultaneous switching noise level
- Convert a momentary switch to a toggle switch
- Balanced Propagation Delays
- Individual Asynchronous Resets
- Divide a clock signal by 2 or 4
- Frequency division
- ESCC
- Latch
