74HCT534D,653
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2001 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT534 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Clock Frequency | 40MHz |
| Family | HCT |
| Current - Quiescent (Iq) | 8μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6mA 6mA |
| Max I(ol) | 0.006 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 30ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Propagation Delay (tpd) | 45 ns |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
74HCT534D,653 Overview
The package is in the form of 20-SOIC (0.295, 7.50mm Width). D flip flop is embedded in the Tape & Reel (TR) package. Currently, the output is configured to use Tri-State, Inverted. In the configuration of the trigger, Positive Edgeis used. This electronic part is mounted in the way of Surface Mount. It operates with a supply voltage of 4.5V~5.5V. In the operating environment, the temperature is -40°C~125°C TA. D-Typedescribes this flip flop. FPGAs belonging to the 74HCTseries contain this type of chip. In order for it to function properly, its output frequency should not exceed 40MHz. D latch consists of 1 elements. This process consumes 8μA quiescents. 20terminations have occurred. JK flip flop belongs to 74HCT534 family. A voltage of 5V is used to power it. Its input capacitance is 3.5pF farads. In terms of electronic devices, this device belongs to the HCTfamily of devices. The RS flip flops belongs to FF/Latches base part number. In this case, the maximum supply voltage (Vsup) reaches 5.5V. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 4.5V. As a result of its reliability, this D flip flop is ideally suited for TAPE AND REEL. A total of 5V power supplies are needed to run it. The flip flop has 2ports embedded within it.
74HCT534D,653 Features
Tape & Reel (TR) package
74HCT series
5V power supplies
74HCT534D,653 Applications
There are a lot of NXP USA Inc. 74HCT534D,653 Flip Flops applications.
- Modulo – n – counter
- ESD performance
- Instrumentation
- Data Synchronizers
- Synchronous counter
- Reduced system switching noise
- Bounce elimination switch
- ATE
- High Performance Logic for test systems
- Single Up Count-Control Line
