74HCT534N,652
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2001 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT534 |
| JESD-30 Code | R-PDIP-T20 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Clock Frequency | 40MHz |
| Family | HCT |
| Current - Quiescent (Iq) | 8μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6mA 6mA |
| Max I(ol) | 0.006 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 30ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Propagation Delay (tpd) | 45 ns |
| Height Seated (Max) | 4.2mm |
| Length | 26.73mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
74HCT534N,652 Overview
The package is in the form of 20-DIP (0.300, 7.62mm). D flip flop is embedded in the Tube package. The output it is configured with uses Tri-State, Inverted. JK flip flop uses Positive Edgeas the trigger. There is an electronic component mounted in the way of Through Hole. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. A temperature of -40°C~125°C TAis used in the operation. This electronic flip flop is of type D-Type. JK flip flop belongs to the 74HCTseries of FPGAs. In order for it to function properly, its output frequency should not exceed 40MHz. In total, there are 1 elements. As a result, it consumes 8μA quiescent current and is not affected by external forces. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. This D latch belongs to the family of 74HCT534. Power is provided by a 5V supply. Input capacitance of this device is 3.5pF farads. This D flip flop belongs to the family of HCT. This part is included in FF/Latches. As soon as Vsup reaches 5.5V, the maximum supply voltage is reached. Normal operation requires a supply voltage (Vsup) above 4.5V. The D latch operates on 5V volts. The D flip flop is embedded with 2ports.
74HCT534N,652 Features
Tube package
74HCT series
5V power supplies
74HCT534N,652 Applications
There are a lot of NXP USA Inc. 74HCT534N,652 Flip Flops applications.
- Load Control
- ESCC
- Asynchronous counter
- Counters
- Count Modes
- Matched Rise and Fall
- Frequency division
- Differential Individual
- Clock pulse
- Instrumentation
