74HCT74DB,112
| Parameters | |
|---|---|
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Clock Frequency | 59MHz |
| Propagation Delay | 15 ns |
| Quiescent Current | 80μA |
| Turn On Delay Time | 18 ns |
| Family | HCT |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 4mA 4mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 44ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2013 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Technology | CMOS |
74HCT74DB,112 Overview
The flip flop is packaged in 14-SSOP (0.209, 5.30mm Width). There is an embedded version in the package Tube. There is a Differentialoutput configured with it. There is a trigger configured with Positive Edge. Surface Mountis occupied by this electronic component. A voltage of 4.5V~5.5Vis used as the supply voltage. In this case, the operating temperature is -40°C~125°C TA. D-Typedescribes this flip flop. It belongs to the 74HCTseries of FPGAs. It should not exceed 59MHzin its output frequency. As a result, it consumes 40μA quiescent current. There have been 14 terminations. If you search by 74HCT74, you will find similar parts. Power is supplied from a voltage of 5V volts. A JK flip flop with a 3.5pFfarad input capacitance is used here. A device of this type belongs to the family of HCT. There is an electronic part that is mounted in the way of Surface Mount. Basically, it is designed with a set of 14 pins. A Positive Edgeclock edge trigger is used in this device. Its flexibility is enhanced by 2 circuits. For high efficiency, the supply voltage should be kept at 5V. In order to operate, the chip has 1 output lines. There is 80μA quiescent current consumption by it.
74HCT74DB,112 Features
Tube package
74HCT series
14 pins
74HCT74DB,112 Applications
There are a lot of Nexperia USA Inc. 74HCT74DB,112 Flip Flops applications.
- Automotive
- Divide a clock signal by 2 or 4
- Safety Clamp
- QML qualified product
- Computing
- Data storage
- Shift Registers
- Computers
- Communications
- Bounce elimination switch
