74LCX821MTC
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74LCX |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| JESD-30 Code | R-PDSO-G24 |
| Function | Standard |
| Qualification Status | COMMERCIAL |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Ports | 2 |
| Clock Frequency | 150MHz |
| Family | LVC/LCX/Z |
| Current - Quiescent (Iq) | 10μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 10 |
| Max Propagation Delay @ V, Max CL | 7ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 7pF |
| Propagation Delay (tpd) | 8.4 ns |
| Length | 7.8mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
74LCX821MTC Overview
The package is in the form of 24-TSSOP (0.173, 4.40mm Width). You can find it in the Tubepackage. Currently, the output is configured to use Tri-State, Non-Inverted. JK flip flop uses Positive Edgeas the trigger. Surface Mountis in the way of this electric part. The JK flip flop operates with an input voltage of 2V~3.6V volts. -40°C~85°C TAis the operating temperature. It is an electronic flip flop with the type D-Type. In terms of FPGAs, it belongs to the 74LCX series. You should not exceed 150MHzin the output frequency of the device. D latch consists of 1 elements. During its operation, it consumes 10μA quiescent energy. In 24terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The power source is powered by 2.5V. The input capacitance of this T flip flop is 7pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. It is a member of the LVC/LCX/Zfamily of D flip flop. The maximal supply voltage (Vsup) reaches 3.6V. A normal operating voltage (Vsup) should remain above 2V. The flip flop has 2ports embedded within it.
74LCX821MTC Features
Tube package
74LCX series
74LCX821MTC Applications
There are a lot of Rochester Electronics, LLC 74LCX821MTC Flip Flops applications.
- Balanced 24 mA output drivers
- Memory
- Storage Registers
- Modulo – n – counter
- Counters
- Buffer registers
- Data Synchronizers
- Circuit Design
- Shift registers
- Bus hold
