74LV574DB,118
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | 74LV |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Additional Feature | BROADSIDE VERSION OF 374 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 1V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LV574 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 1V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Clock Frequency | 70MHz |
| Family | LV/LV-A/LVX/H |
| Current - Quiescent (Iq) | 20μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 16mA 16mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 17ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 25 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Propagation Delay (tpd) | 43 ns |
| Max Frequency@Nom-Sup | 20000000Hz |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
74LV574DB,118 Overview
20-SSOP (0.209, 5.30mm Width)is the way it is packaged. There is an embedded version in the package Tape & Reel (TR). The output it is configured with uses Tri-State, Non-Inverted. JK flip flop uses Positive Edgeas the trigger. There is an electronic component mounted in the way of Surface Mount. It operates with a supply voltage of 1V~5.5V. It is operating at a temperature of -40°C~125°C TA. This electronic flip flop is of type D-Type. It belongs to the 74LVseries of FPGAs. You should not exceed 70MHzin its output frequency. The element count is 1 . As a result, it consumes 20μA quiescent current and is not affected by external forces. There are 20 terminations,You can search similar parts based on 74LV574. It is powered from a supply voltage of 3.3V. Its input capacitance is 3.5pF farads. Electronic devices of this type belong to the LV/LV-A/LVX/Hfamily. This device has the base part number FF/Latches. 5.5Vis the maximum supply voltage (Vsup). The supply voltage (Vsup) should be kept above 1V for normal operation. Due to its reliability, this T flip flop is well suited for TAPE AND REEL. It operates from 3.3V power supplies. The flip flop has 2embedded ports. Additionally, you may refer to the additional BROADSIDE VERSION OF 374 of the electronic flip flop.
74LV574DB,118 Features
Tape & Reel (TR) package
74LV series
3.3V power supplies
74LV574DB,118 Applications
There are a lot of NXP USA Inc. 74LV574DB,118 Flip Flops applications.
- Patented noise
- Bus hold
- Clock pulse
- Frequency Divider circuits
- Instrumentation
- Computers
- 2 – Bit synchronous counter
- Frequency Dividers
- Reduced system switching noise
- Guaranteed simultaneous switching noise level
