74LVC16374ABX,518
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 60-XFQFN Dual Rows, Exposed Pad |
| Number of Pins | 60 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | 74LVC |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 60 |
| Type | D-Type |
| Terminal Finish | MATTE TIN |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | BOTTOM |
| Terminal Form | BUTT |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVC16374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 1.65V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Clock Frequency | 300MHz |
| Propagation Delay | 7.5 ns |
| Quiescent Current | 100nA |
| Turn On Delay Time | 7 ns |
| Family | LVC/LCX/Z |
| Current - Quiescent (Iq) | 20μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 5.4ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 100000000Hz |
| Height Seated (Max) | 0.5mm |
| Length | 6mm |
| Width | 4mm |
| RoHS Status | RoHS Compliant |
74LVC16374ABX,518 Overview
It is embeded in 60-XFQFN Dual Rows, Exposed Pad case. As part of the package Tape & Reel (TR), it is embedded. It is configured with Tri-State, Non-Invertedas an output. Positive Edgeis the trigger it is configured with. There is an electronic component mounted in the way of Surface Mount. It operates with a supply voltage of 1.65V~3.6V. It is operating at a temperature of -40°C~125°C TA. This logic flip flop is classified as type D-Type. JK flip flop belongs to the 74LVCseries of FPGAs. It should not exceed 300MHzin its output frequency. A total of 2 elements are present. As a result, it consumes 20μA quiescent current. 60terminations have occurred. The 74LVC16374family includes it. A voltage of 3.3V provides power to the D latch. This T flip flop has a capacitance of 5pF farads at the input. In this case, the D flip flop belongs to the LVC/LCX/Zfamily. Surface Mount mounts this electronic component. It is designed with 60 pins. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. This part is included in FF/Latches. Flip flops designed with 16bits are used in this part. As soon as Vsup reaches 3.6V, the maximum supply voltage is reached. For normal operation, the supply voltage (Vsup) should be above 1.65V. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. In order for the device to operate, it requires 3.3V power supplies. A D flip flop with 2embedded ports is available. This D latch consumes 100nA quiescent current at all.
74LVC16374ABX,518 Features
Tape & Reel (TR) package
74LVC series
60 pins
16 Bits
3.3V power supplies
74LVC16374ABX,518 Applications
There are a lot of Nexperia USA Inc. 74LVC16374ABX,518 Flip Flops applications.
- ESD performance
- Asynchronous counter
- Individual Asynchronous Resets
- Supports Live Insertion
- Synchronous counter
- QML qualified product
- Reduced system switching noise
- Divide a clock signal by 2 or 4
- Dynamic threshold performance
- Storage Registers
