74LVC16374APFG
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.173, 4.40mm Width) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74LVC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 2.7V~3.6V |
| Base Part Number | 74LVC16374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Clock Frequency | 150MHz |
| Current - Quiescent (Iq) | 10μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 4.5ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
74LVC16374APFG Overview
In the form of 48-TFSOP (0.173, 4.40mm Width), it has been packaged. The Tubepackage contains it. T flip flop uses Tri-State, Non-Invertedas its output configuration. This trigger uses the value Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 2.7V~3.6V volts. -40°C~85°C TAis the operating temperature. It belongs to the type D-Typeof flip flops. JK flip flop belongs to the 74LVCseries of FPGAs. It should not exceed 150MHzin its output frequency. In total, it contains 2 elements. As a result, it consumes 10μA quiescent current. The 74LVC16374family includes it. The input capacitance of this T flip flop is 4.5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded.
74LVC16374APFG Features
Tube package
74LVC series
74LVC16374APFG Applications
There are a lot of Renesas Electronics America Inc. 74LVC16374APFG Flip Flops applications.
- Supports Live Insertion
- Registers
- Set-reset capability
- ATE
- Cold spare funcion
- ESD performance
- ESCC
- Convert a momentary switch to a toggle switch
- Automotive
- Test & Measurement
