74LVC1G175DCKRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Weight | 2.494758mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Base Part Number | 74LVC1G175 |
| Function | Reset |
| Output Type | Non-Inverted |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Number of Circuits | 1 |
| Load Capacitance | 50pF |
| Output Current | 32mA |
| Number of Bits | 1 |
| Clock Frequency | 175MHz |
| Propagation Delay | 5.7 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 1 ns |
| Family | LVC/LCX/Z |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 32mA |
| Max I(ol) | 0.032 A |
| Max Propagation Delay @ V, Max CL | 4ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74LVC1G175DCKRG4 Overview
In the form of 6-TSSOP, SC-88, SOT-363, it has been packaged. There is an embedded version in the package Tape & Reel (TR). There is a Non-Invertedoutput configured with it. It is configured with a trigger that uses Positive Edge. Surface Mountis in the way of this electric part. The JK flip flop operates at 1.65V~5.5Vvolts. The operating temperature is -40°C~125°C TA. This electronic flip flop is of type D-Type. It is a type of FPGA belonging to the 74LVC series. A frequency of 175MHzshould be the maximum output frequency. Currently, there are 6 terminations. JK flip flop belongs to 74LVC1G175 family. Power is supplied from a voltage of 1.8V volts. Its input capacitance is 3pF farads. An electronic device belonging to the family LVC/LCX/Zcan be found here. There is an electronic component mounted in the way of Surface Mount. With its 6pins, it is designed to work with most electronic flip flops. This device exhibits a clock edge trigger type of Positive Edge. It is part of the FF/Latchesbase part number family. An electronic part designed with 1bits is used in this application. As soon as Vsup reaches 5.5V, the maximum supply voltage is reached. Using 1 circuits, it is highly flexible. This D flip flop is well suited for TR based on its reliable performance. In order for the device to operate, it requires 3.3V power supplies. In addition to its maximum design flexibility, the output current of the T flip flop is 32mA. It consumes 10μA of quiescent current without being affected by external factors.
74LVC1G175DCKRG4 Features
Tape & Reel (TR) package
74LVC series
6 pins
1 Bits
3.3V power supplies
74LVC1G175DCKRG4 Applications
There are a lot of Texas Instruments 74LVC1G175DCKRG4 Flip Flops applications.
- CMOS Process
- Registers
- Frequency Dividers
- 2 – Bit synchronous counter
- Cold spare funcion
- Load Control
- Frequency Divider circuits
- Safety Clamp
- Supports Live Insertion
- Data Synchronizers
