74LVC1G175GW-Q100H
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | 74LVC |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 3.3V |
| Base Part Number | 74LVC1G175 |
| Function | Reset |
| Output Type | Non-Inverted |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Bits | 1 |
| Clock Frequency | 200MHz |
| Propagation Delay | 4 ns |
| Quiescent Current | 10μA |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 32mA 32mA |
| Output Polarity | TRUE |
| Max Propagation Delay @ V, Max CL | 4ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 2.5pF |
| Number of Input Lines | 1 |
| fmax-Min | 200 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Length | 2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74LVC1G175GW-Q100H Overview
The flip flop is packaged in a case of 6-TSSOP, SC-88, SOT-363. Package Tape & Reel (TR)embeds it. T flip flop uses Non-Invertedas the output. The trigger configured with it uses Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. A supply voltage of 1.65V~5.5V is required for operation. It is operating at a temperature of -40°C~125°C TA. It is an electronic flip flop with the type D-Type. It belongs to the 74LVCseries of FPGAs. Its output frequency should not exceed 200MHz. A total of 6terminations have been recorded. D latch belongs to the 74LVC1G175 family. Power is supplied from a voltage of 3.3V volts. A 2.5pFfarad input capacitance is provided by this T flip flop. In terms of electronic devices, this device belongs to the LVC/LCX/Zfamily of devices. Surface Mount mounts this electronic component. A total of 6pins are provided on this board. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. It is designed with a number of bits of 1. In this case, the maximum supply voltage (Vsup) reaches 5.5V. As of now, there are 1input lines. 10μAquiescent current consumed.
74LVC1G175GW-Q100H Features
Tape & Reel (TR) package
74LVC series
6 pins
1 Bits
74LVC1G175GW-Q100H Applications
There are a lot of Nexperia USA Inc. 74LVC1G175GW-Q100H Flip Flops applications.
- Latch-up performance
- QML qualified product
- Latch
- Event Detectors
- Pattern generators
- Balanced 24 mA output drivers
- Computers
- Synchronous counter
- Data transfer
- Differential Individual
