74LVC1G74DC-Q100H
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFSOP (0.091, 2.30mm Width) |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Series | 74LVC |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74LVC1G74 |
| JESD-30 Code | R-PDSO-G8 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Bits | 1 |
| Clock Frequency | 200MHz |
| Quiescent Current | 100nA |
| Family | LVC/LCX/Z |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 32mA 32mA |
| Max Propagation Delay @ V, Max CL | 4.1ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| fmax-Min | 200 MHz |
| Length | 2.3mm |
| Width | 2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74LVC1G74DC-Q100H Overview
As a result, it is packaged as 8-VFSOP (0.091, 2.30mm Width). As part of the package Tape & Reel (TR), it is embedded. T flip flop is configured with an output of Differential. This trigger uses the value Positive Edge. It is mounted in the way of Surface Mount. The supply voltage is set to 1.65V~5.5V. Currently, the operating temperature is -40°C~125°C TA. It belongs to the type D-Typeof flip flops. FPGAs belonging to the 74LVCseries contain this type of chip. You should not exceed 200MHzin the output frequency of the device. D latch consists of 1 elements. As a result, it consumes 40μA of quiescent current without being affected by external factors. There have been 8 terminations. It is a member of the 74LVC1G74 family. A voltage of 1.8V is used as the power supply for this D latch. A 4pFfarad input capacitance is provided by this T flip flop. A device of this type belongs to the family of LVC/LCX/Z. It is mounted in the way of Surface Mount. Flip flops designed with 1bits are used in this part. Vsup reaches 5.5V, the maximal supply voltage. It consumes a total of 100nA quiescent current at any given time.
74LVC1G74DC-Q100H Features
Tape & Reel (TR) package
74LVC series
1 Bits
74LVC1G74DC-Q100H Applications
There are a lot of Nexperia USA Inc. 74LVC1G74DC-Q100H Flip Flops applications.
- Bus hold
- Balanced Propagation Delays
- Guaranteed simultaneous switching noise level
- Individual Asynchronous Resets
- Safety Clamp
- Memory
- Storage registers
- Shift Registers
- Functionally equivalent to the MC10/100EL29
- ATE
