74LVC374AD,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.7V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LVC374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 150MHz |
| Propagation Delay | 2.7 ns |
| Quiescent Current | 100nA |
| Turn On Delay Time | 1.5 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 10μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 7ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Input Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74LVC374AD,112 Overview
The package is in the form of 20-SOIC (0.295, 7.50mm Width). Package Tubeembeds it. It is configured with Tri-State, Non-Invertedas an output. This trigger uses the value Positive Edge. Surface Mountis occupied by this electronic component. With a supply voltage of 1.65V~3.6V volts, it operates. Temperature is set to -40°C~125°C TA. The type of this D latch is D-Type. FPGAs belonging to the 74LVCseries contain this type of chip. In order for it to function properly, its output frequency should not exceed 150MHz. In total, there are 1 elements. As a result, it consumes 10μA quiescent current and is not affected by external forces. A total of 20terminations have been recorded. You can search similar parts based on 74LVC374. A voltage of 2.7V provides power to the D latch. Its input capacitance is 4pFfarads. LVC/LCX/Zis the family of this D flip flop. This electronic part is mounted in the way of Surface Mount. As you can see from the design, it has pins with 20. This device has Positive Edgeas its clock edge trigger type. There are 8bits in this flip flop. There is a 3.6Vmaximum supply voltage (Vsup). The flip flop has 2ports embedded within it. This input has 8lines. This D latch consumes 100nA quiescent current at all.
74LVC374AD,112 Features
Tube package
74LVC series
20 pins
8 Bits
74LVC374AD,112 Applications
There are a lot of Nexperia USA Inc. 74LVC374AD,112 Flip Flops applications.
- Guaranteed simultaneous switching noise level
- Frequency Dividers
- Test & Measurement
- Data storage
- Data Synchronizers
- Single Down Count-Control Line
- Synchronous counter
- Frequency Divider circuits
- Circuit Design
- Buffer registers
