74LVC374AT20-13
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 190.990737mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Function | Standard |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Circuits | 2 |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 125MHz |
| Propagation Delay | 6.8 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 3.8 ns |
| Family | LVC/LCX/Z |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 6.8ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Output Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
74LVC374AT20-13 Overview
The item is packaged in 20-TSSOP (0.173, 4.40mm Width)cases. It is included in the package Tape & Reel (TR). This output is configured with Non-Inverted. This trigger is configured to use Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. A voltage of 1.65V~3.6Vis used as the supply voltage. The operating temperature is -40°C~125°C TA. This logic flip flop is classified as type D-Type. FPGAs belonging to the 74LVCseries contain this type of chip. A frequency of 125MHzshould be the maximum output frequency. A total of 1elements are contained within it. Terminations are 20. Power is provided by a 1.8V supply. There is 4pF input capacitance for this T flip flop. An electronic device belonging to the family LVC/LCX/Zcan be found here. It is mounted by the way of Surface Mount. As you can see from the design, it has pins with 20. Its clock edge trigger type is Positive Edge. Flip flops designed with 8bits are used in this part. As soon as Vsup reaches 3.6V, the maximum supply voltage is reached. The superior flexibility is achieved through the use of 2 circuits. The D flip flop is embedded with 2ports. There are 8 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. This D latch consumes 10μA quiescent current at all.
74LVC374AT20-13 Features
Tape & Reel (TR) package
74LVC series
20 pins
8 Bits
74LVC374AT20-13 Applications
There are a lot of Diodes Incorporated 74LVC374AT20-13 Flip Flops applications.
- Digital electronics systems
- Control circuits
- Automotive
- Reduced system switching noise
- Shift Registers
- Differential Individual
- ESD performance
- Shift registers
- Frequency division
- Instrumentation
