Parameters |
Mounting Type |
Surface Mount |
Package / Case |
14-SOIC (0.154, 3.90mm Width) |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
Series |
74LVC |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Type |
D-Type |
Voltage - Supply |
1.65V~3.6V |
Base Part Number |
74LVC74 |
Function |
Set(Preset) and Reset |
Output Type |
Differential |
Number of Elements |
2 |
Clock Frequency |
250MHz |
Current - Quiescent (Iq) |
10μA |
Current - Output High, Low |
24mA 24mA |
Number of Bits per Element |
1 |
Max Propagation Delay @ V, Max CL |
5.2ns @ 3.3V, 50pF |
Trigger Type |
Positive Edge |
Input Capacitance |
4pF |
RoHS Status |
ROHS3 Compliant |
74LVC74AD/AUJ Overview
The flip flop is packaged in a case of 14-SOIC (0.154, 3.90mm Width). D flip flop is embedded in the Tape & Reel (TR) package. T flip flop is configured with an output of Differential. It is configured with a trigger that uses Positive Edge. Surface Mountis occupied by this electronic component. Powered by a 1.65V~3.6Vvolt supply, it operates as follows. -40°C~125°C TAis the operating temperature. This logic flip flop is classified as type D-Type. The FPGA belongs to the 74LVC series. There should be no greater frequency than 250MHzon its output. D latch consists of 2 elements. As a result, it consumes 10μA quiescent current and is not affected by external forces. JK flip flop belongs to 74LVC74 family. The input capacitance of this T flip flop is 4pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded.
74LVC74AD/AUJ Features
Tape & Reel (TR) package
74LVC series
74LVC74AD/AUJ Applications
There are a lot of NXP USA Inc. 74LVC74AD/AUJ Flip Flops applications.
- Bounce elimination switch
- Pattern generators
- High Performance Logic for test systems
- ESD protection
- Modulo – n – counter
- Latch-up performance
- Shift Registers
- Power down protection
- ATE
- EMI reduction circuitry