74LVC823AD,112
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | WITH CLEAR AND CLOCK ENABLE |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LVC823 |
| Function | Master Reset |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Ports | 2 |
| Number of Bits | 9 |
| Clock Frequency | 200MHz |
| Propagation Delay | 5.1 ns |
| Turn On Delay Time | 3.7 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 10μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 10ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Input Lines | 9 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
74LVC823AD,112 Overview
It is embeded in 24-SOIC (0.295, 7.50mm Width) case. As part of the package Tube, it is embedded. T flip flop uses Tri-State, Non-Invertedas its output configuration. It is configured with a trigger that uses a value of Positive Edge. The electronic part is mounted in the way of Surface Mount. The supply voltage is set to 1.65V~3.6V. It is operating at a temperature of -40°C~125°C TA. This logic flip flop is classified as type D-Type. In terms of FPGAs, it belongs to the 74LVC series. Its output frequency should not exceed 200MHz. A total of 1elements are present in it. T flip flop consumes 10μA quiescent energy. A total of 24 terminations have been made. The object belongs to the 74LVC823 family. The D flip flop is powered by a voltage of 1.8V . This T flip flop has a capacitance of 5pF farads at the input. LVC/LCX/Zis the family of this D flip flop. In this case, the electronic component is mounted in the way of Surface Mount. Basically, it is designed with a set of 24 pins. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. There are 9bits in its design. It reaches 3.6Vwhen the supply voltage is maximal (Vsup). This flip flop has a total of 2ports. Currently, there are 9 lines of input. Additionally, it is characterized by WITH CLEAR AND CLOCK ENABLE.
74LVC823AD,112 Features
Tube package
74LVC series
24 pins
9 Bits
74LVC823AD,112 Applications
There are a lot of Nexperia USA Inc. 74LVC823AD,112 Flip Flops applications.
- Balanced 24 mA output drivers
- Event Detectors
- High Performance Logic for test systems
- Count Modes
- Shift registers
- Buffer registers
- Supports Live Insertion
- Frequency Divider circuits
- Convert a momentary switch to a toggle switch
- Data transfer
