74LVCH16374ADGGRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Weight | 223.195796mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVCH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74LVCH16374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 1.65V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 16 |
| Clock Frequency | 150MHz |
| Propagation Delay | 4.9 ns |
| Quiescent Current | 20μA |
| Turn On Delay Time | 7 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 4.5ns @ 3.3V, 50pF |
| Prop. Delay@Nom-Sup | 4.5 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Output Lines | 8 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Max Frequency@Nom-Sup | 150000000Hz |
| Height | 1.2mm |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1.15mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74LVCH16374ADGGRG4 Overview
The flip flop is packaged in 48-TFSOP (0.240, 6.10mm Width). D flip flop is embedded in the Tape & Reel (TR) package. T flip flop uses Tri-State, Non-Invertedas its output configuration. It is configured with a trigger that uses a value of Positive Edge. There is an electric part mounted in the way of Surface Mount. The JK flip flop operates at 1.65V~3.6Vvolts. Currently, the operating temperature is -40°C~125°C TA. It belongs to the type D-Typeof flip flops. In this case, it is a type of FPGA belonging to the 74LVCH series. A frequency of 150MHzshould not be exceeded by its output. The element count is 2 . There are 48 terminations,If you search by 74LVCH16374, you will find similar parts. The power supply voltage is 1.8V. Its input capacitance is 5pFfarads. It belongs to the family of electronic devices known as LVC/LCX/Z. This electronic part is mounted in the way of Surface Mount. This board is designed with 48pins on it. This device has the clock edge trigger type of Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. There are 16bits in its design. Vsup reaches 3.6V, the maximal supply voltage. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 1.65V. Considering the reliability of this T flip flop, it is well suited for TR. The D latch operates on 3.3V volts. There are 2 ports embedded in the flip flops. With an output current of 24mA, this device offers maximum design flexibility. In order to operate, the chip has 8 output lines. It consumes 20μA of quiescent current without being affected by external factors.
74LVCH16374ADGGRG4 Features
Tape & Reel (TR) package
74LVCH series
48 pins
16 Bits
3.3V power supplies
74LVCH16374ADGGRG4 Applications
There are a lot of Texas Instruments 74LVCH16374ADGGRG4 Flip Flops applications.
- Reduced system switching noise
- Computing
- ESD protection
- Single Down Count-Control Line
- Count Modes
- ESD performance
- Memory
- Buffered Clock
- Memory
- Control circuits
