74LVT16374AEV/G,51
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 56-VFBGA |
| Surface Mount | YES |
| Number of Pins | 56 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | 74LVT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 56 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LVT16374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 150MHz |
| Propagation Delay | 3 ns |
| Family | LVT |
| Current - Quiescent (Iq) | 120μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 5ns @ 3.3V, 50pF |
| Prop. Delay@Nom-Sup | 5 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Output Lines | 8 |
| Max Frequency@Nom-Sup | 150000000Hz |
| Height Seated (Max) | 1mm |
| Length | 7mm |
| Width | 4.5mm |
| RoHS Status | RoHS Compliant |
74LVT16374AEV/G,51 Overview
56-VFBGAis the packaging method. Package Trayembeds it. In the configuration, Tri-State, Non-Invertedis used as the output. In the configuration of the trigger, Positive Edgeis used. It is mounted in the way of Surface Mount. A voltage of 2.7V~3.6Vis used as the supply voltage. The operating temperature is -40°C~85°C TA. It belongs to the type D-Typeof flip flops. JK flip flop belongs to the 74LVTseries of FPGAs. A frequency of 150MHzshould not be exceeded by its output. D latch consists of 2 elements. T flip flop consumes 120μA quiescent energy. The number of terminations is 56. JK flip flop belongs to 74LVT16374 family. A voltage of 3.3V is used as the power supply for this D latch. JK flip flop input capacitance is 3pF farads. The electronic device belongs to the LVTfamily. The electronic flip flop is designed with pins 56. This device is part of the FF/Latchesbase part number family. It is designed with 8bits. As soon as Vsup reaches 3.6V, the maximum supply voltage is reached. As a result of its reliable performance, this T flip flop is suitable for TAPE AND REEL. A total of 2ports are embedded in the D flip flop. For high efficiency, the supply voltage should be set to 3.3V. There are 8 output lines on it.
74LVT16374AEV/G,51 Features
Tray package
74LVT series
56 pins
8 Bits
74LVT16374AEV/G,51 Applications
There are a lot of Nexperia USA Inc. 74LVT16374AEV/G,51 Flip Flops applications.
- Consumer
- Shift registers
- Control circuits
- Patented noise
- Data Synchronizers
- Single Up Count-Control Line
- Data storage
- Memory
- Frequency Divider circuits
- Supports Live Insertion
