74LVTH162374DGGRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Weight | 223.195796mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVTH |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVTH162374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 12mA |
| Number of Bits | 16 |
| Clock Frequency | 160MHz |
| Propagation Delay | 3.4 ns |
| Quiescent Current | 5mA |
| Turn On Delay Time | 3.4 ns |
| Family | LVT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 190μA |
| Current - Output High, Low | 12mA 12mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 5.3ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Width | 6.1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74LVTH162374DGGRG4 Overview
In the form of 48-TFSOP (0.240, 6.10mm Width), it has been packaged. A package named Tape & Reel (TR)includes it. It is configured with Tri-State, Non-Invertedas an output. It is configured with a trigger that uses Positive Edge. Surface Mountis occupied by this electronic component. The JK flip flop operates with an input voltage of 2.7V~3.6V volts. A temperature of -40°C~85°C TAis used in the operation. D-Typedescribes this flip flop. The FPGA belongs to the 74LVTH series. It should not exceed 160MHzin its output frequency. D latch consists of 2 elements. As a result, it consumes 190μA quiescent current and is not affected by external forces. Currently, there are 48 terminations. JK flip flop belongs to 74LVTH162374 family. An input voltage of 3.3Vpowers the D latch. This JK flip flop has a 3pFfarad input capacitance. This D flip flop belongs to the family of LVT. There is an electronic part mounted in the way of Surface Mount. A total of 48pins are provided on this board. The clock edge trigger type for this device is Positive Edge. This device is part of the FF/Latchesbase part number family. Flip flops designed with 16bits are used in this part. A reliable performance of this D flip flop makes it well suited for use in TR. This D flip flop is equipped with 0 ports. In order to ensure high efficiency, the supply voltage should remain at 3.3V. With an output current of 12mA, this device offers maximum design flexibility. In order for the chip to function, it has 3output lines. Quiescent current is consumed by the D latch in the amount of 5mA.
74LVTH162374DGGRG4 Features
Tape & Reel (TR) package
74LVTH series
48 pins
16 Bits
74LVTH162374DGGRG4 Applications
There are a lot of Texas Instruments 74LVTH162374DGGRG4 Flip Flops applications.
- Storage registers
- Latch
- Memory
- Load Control
- Control circuits
- Count Modes
- ESD protection
- Storage Registers
- Shift Registers
- Data transfer
