74LVTH162374MTX
| Parameters | |
|---|---|
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.7V |
| Number of Bits | 16 |
| Clock Frequency | 160MHz |
| Propagation Delay | 6.2 ns |
| Turn On Delay Time | 5.3 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 190μA |
| Current - Output High, Low | 12mA 12mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 5.3ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -12mA |
| Input Capacitance | 4pF |
| Low Level Output Current | 12mA |
| Number of Input Lines | 2 |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Supplier Device Package | 48-TSSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVTH |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 2.7V~3.6V |
| Frequency | 150MHz |
| Base Part Number | 74LVTH162374 |
74LVTH162374MTX Overview
It is embeded in 48-TFSOP (0.240, 6.10mm Width) case. You can find it in the Tape & Reel (TR)package. T flip flop uses Tri-State, Non-Invertedas its output configuration. The trigger configured with it uses Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 2.7V~3.6V. In this case, the operating temperature is -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. It belongs to the 74LVTHseries of FPGAs. In order for it to function properly, its output frequency should not exceed 160MHz. There are 2 elements in it. There is 190μA quiescent consumption. The 74LVTH162374 family contains this object. This JK flip flop has a 4pFfarad input capacitance. There is an electronic part that is mounted in the way of Surface Mount. This board has 48 pins. This device exhibits a clock edge trigger type of Positive Edge. It is designed with 16bits. Due to its superior flexibility, it uses 2 circuits. If high efficiency is to be achieved, the supply voltage should be maintained at 3.3V. There are no output lines on the JK flip flop. A total of 2input lines have been provided. It is set to -12mAfor the high level output current. The low level output current is set to 12mA. The operating temperature should be lower than 85°C. In order for the system to operate properly, the temperature should be higher than -40°C. Normally, it operates with a voltage of 2.7VV as its minimum supply voltage. It supports a maximum supply voltage of 3.6V volts. 150MHzis the maximum frequency that can be achieved.
74LVTH162374MTX Features
Tape & Reel (TR) package
74LVTH series
48 pins
16 Bits
74LVTH162374MTX Applications
There are a lot of ON Semiconductor 74LVTH162374MTX Flip Flops applications.
- Asynchronous counter
- Reduced system switching noise
- EMI reduction circuitry
- Bounce elimination switch
- Latch-up performance
- Set-reset capability
- Balanced 24 mA output drivers
- Automotive
- Storage registers
- Data Synchronizers
