74LVTH16374GX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 54-LFBGA |
| Number of Pins | 54 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVTH |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 54 |
| Type | D-Type |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 3.3V |
| Base Part Number | 74LVTH16374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 3.3V |
| Polarity | Non-Inverting |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Clock Frequency | 160MHz |
| Propagation Delay | 5.2 ns |
| Turn On Delay Time | 4.5 ns |
| Family | LVT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 190μA |
| Current - Output High, Low | 32mA 64mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 4.5ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Input Lines | 2 |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 1.4mm |
| Width | 5.5mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74LVTH16374GX Overview
It is packaged in the way of 54-LFBGA. There is an embedded version in the package Tape & Reel (TR). T flip flop is configured with an output of Tri-State, Non-Inverted. There is a trigger configured with Positive Edge. This electronic part is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 2.7V~3.6V. A temperature of -40°C~85°C TAis used in the operation. It is an electronic flip flop with the type D-Type. It belongs to the 74LVTHseries of FPGAs. This D flip flop should not have a frequency greater than 160MHz. As a result, it consumes 190μA quiescent current and is not affected by external forces. In 54terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. JK flip flop belongs to 74LVTH16374 family. It is powered from a supply voltage of 3.3V. The input capacitance of this T flip flop is 4pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. The electronic device belongs to the LVTfamily. It is mounted in the way of Surface Mount. This board has 54 pins. The clock edge trigger type for this device is Positive Edge. Flip flops designed with 16bits are used in this part. This D flip flop is equipped with 0 ports. If high efficiency is to be achieved, the supply voltage should be maintained at 3.3V. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. Currently, there are 2 lines of input.
74LVTH16374GX Features
Tape & Reel (TR) package
74LVTH series
54 pins
16 Bits
74LVTH16374GX Applications
There are a lot of ON Semiconductor 74LVTH16374GX Flip Flops applications.
- Safety Clamp
- Digital electronics systems
- Single Down Count-Control Line
- Pattern generators
- Differential Individual
- Data transfer
- Communications
- Supports Live Insertion
- CMOS Process
- Computing
