74LVTH574MSA
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74LVTH |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | MATTE TIN |
| Additional Feature | BROADSIDE VERSION OF 374 |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PDSO-G20 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Ports | 2 |
| Clock Frequency | 150MHz |
| Family | LVT |
| Current - Quiescent (Iq) | 190μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 4.6ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Propagation Delay (tpd) | 5.3 ns |
| Height Seated (Max) | 2.05mm |
| Length | 7.2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
74LVTH574MSA Overview
The flip flop is packaged in 20-SSOP (0.209, 5.30mm Width). The Tubepackage contains it. T flip flop uses Tri-State, Non-Invertedas its output configuration. Positive Edgeis the trigger it is configured with. It is mounted in the way of Surface Mount. A 2.7V~3.6Vsupply voltage is required for it to operate. It is at -40°C~85°C TAdegrees Celsius that the system is operating. This electronic flip flop is of type D-Type. It belongs to the 74LVTHseries of FPGAs. It should not exceed 150MHzin its output frequency. There are 1 elements in it. As a result, it consumes 190μA quiescent current. The number of terminations is 20. The D flip flop is powered by a voltage of 3.3V . A JK flip flop with a 4pFfarad input capacitance is used here. Devices in the LVTfamily are electronic devices. As soon as Vsup reaches 3.6V, the maximum supply voltage is reached. A normal operating voltage (Vsup) should remain above 2.7V. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It is also characterized by BROADSIDE VERSION OF 374.
74LVTH574MSA Features
Tube package
74LVTH series
74LVTH574MSA Applications
There are a lot of Rochester Electronics, LLC 74LVTH574MSA Flip Flops applications.
- Event Detectors
- Convert a momentary switch to a toggle switch
- Asynchronous counter
- Bounce elimination switch
- Counters
- Modulo – n – counter
- Load Control
- Circuit Design
- Synchronous counter
- Communications
