74VCX16721MTD
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 56 |
| Supplier Device Package | 56-TSSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74VCX |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 1.4V~3.6V |
| Frequency | 250MHz |
| Base Part Number | 74VCX16721 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 1 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.4V |
| Number of Bits | 20 |
| Clock Frequency | 250MHz |
| Propagation Delay | 8.8 ns |
| Turn On Delay Time | 1.5 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 20μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 20 |
| Max Propagation Delay @ V, Max CL | 3.5ns @ 3.3V, 30pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -24mA |
| Input Capacitance | 6pF |
| Low Level Output Current | 24mA |
| Number of Input Lines | 2 |
| Number of Output Lines | 20 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74VCX16721MTD Overview
The package is in the form of 56-TFSOP (0.240, 6.10mm Width). It is contained within the Tubepackage. As configured, the output uses Tri-State, Non-Inverted. JK flip flop uses Positive Edgeas the trigger. Surface Mountis occupied by this electronic component. The JK flip flop operates at a voltage of 1.4V~3.6V. Currently, the operating temperature is -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. It is a type of FPGA belonging to the 74VCX series. Its output frequency should not exceed 250MHz Hz. In total, it contains 1 elements. It consumes 20μA of quiescent The 74VCX16721family includes it. Its input capacitance is 6pFfarads. There is an electronic part mounted in the way of Surface Mount. With its 56pins, it is designed to work with most electronic flip flops. This device exhibits a clock edge trigger type of Positive Edge. It is designed with 20bits. To achieve this superior flexibility, 1 circuits are used. There are 20 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. This input has 2lines. A -24mAvalue is set for the high level output current. In the low level output current setting, 24mAis used. A temperature below 85°Cshould be used for operation. It is recommended that the operating temperature is higher than -40°C. The RS flip flop is designed to operate with a minimal supply voltage of 1.4VV. A maximum voltage of 3.6V can be provided by it. It is possible to obtain a frequency of 250MHz.
74VCX16721MTD Features
Tube package
74VCX series
56 pins
20 Bits
74VCX16721MTD Applications
There are a lot of ON Semiconductor 74VCX16721MTD Flip Flops applications.
- QML qualified product
- Single Down Count-Control Line
- Instrumentation
- Common Clocks
- Safety Clamp
- Parallel data storage
- Asynchronous counter
- Functionally equivalent to the MC10/100EL29
- ESCC
- Data transfer
