74VHC273TTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74VHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74VHC273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Clock Frequency | 110MHz |
| Propagation Delay | 17.1 ns |
| Turn On Delay Time | 7.3 ns |
| Family | AHC/VHC |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 11ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 7pF |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 70000000Hz |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74VHC273TTR Overview
The package is in the form of 20-TSSOP (0.173, 4.40mm Width). The Tape & Reel (TR)package contains it. This output is configured with Non-Inverted. Positive Edgeis the trigger it is configured with. This electronic part is mounted in the way of Surface Mount. With a supply voltage of 2V~5.5V volts, it operates. It is operating at -55°C~125°C TA. There is D-Type type of electronic flip flop associated with this device. The FPGA belongs to the 74VHC series. There should be no greater frequency than 110MHzon its output. A total of 1 elements are present. As a result, it consumes 4μA of quiescent current without being affected by external factors. Currently, there are 20 terminations. JK flip flop belongs to 74VHC273 family. The power source is powered by 3.3V. The input capacitance of this JK flip flopis 7pF farads. The electronic device belongs to the AHC/VHCfamily. It is mounted in the way of Surface Mount. This board has 20 pins. The clock edge trigger type for this device is Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. There are 8bits in its design. It reaches 5.5Vwhen the supply voltage is maximal (Vsup). It is imperative that the supply voltage (Vsup) is maintained above 2Vin order to ensure normal operation. The superior flexibility of this product is achieved by using 8 circuits. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. A total of 2/5.5V power supplies are needed to run it.
74VHC273TTR Features
Tape & Reel (TR) package
74VHC series
20 pins
8 Bits
2/5.5V power supplies
74VHC273TTR Applications
There are a lot of STMicroelectronics 74VHC273TTR Flip Flops applications.
- Synchronous counter
- Latch
- Buffered Clock
- Patented noise
- Memory
- Parallel data storage
- Matched Rise and Fall
- Functionally equivalent to the MC10/100EL29
- Guaranteed simultaneous switching noise level
- Convert a momentary switch to a toggle switch
