74VHC574SJ
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74VHC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | MATTE TIN |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Standard |
| Qualification Status | COMMERCIAL |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Ports | 2 |
| Clock Frequency | 115MHz |
| Family | AHC/VHC |
| Current - Quiescent (Iq) | 4μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 8mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 10.6ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
74VHC574SJ Overview
The package is in the form of 20-SOIC (0.209, 5.30mm Width). The package Tubecontains it. T flip flop uses Tri-State, Non-Invertedas the output. In the configuration of the trigger, Positive Edgeis used. In this case, the electronic component is mounted in the way of Surface Mount. A 2V~5.5Vsupply voltage is required for it to operate. Temperature is set to -40°C~85°C TA. A flip flop of this type is classified as a D-Type. In this case, it is a type of FPGA belonging to the 74VHC series. Its output frequency should not exceed 115MHz Hz. In total, there are 1 elements. As a result, it consumes 4μA quiescent current and is not affected by external forces. A total of 20terminations have been recorded. It is powered from a supply voltage of 3.3V. There is 4pF input capacitance for this T flip flop. This D flip flop belongs to the family of AHC/VHC. Vsup reaches 5.5V, the maximal supply voltage. Normally, the supply voltage (Vsup) should be kept above 2V. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.
74VHC574SJ Features
Tube package
74VHC series
74VHC574SJ Applications
There are a lot of Rochester Electronics, LLC 74VHC574SJ Flip Flops applications.
- Dynamic threshold performance
- ESCC
- Frequency Dividers
- Control circuits
- Reduced system switching noise
- Common Clocks
- Clock pulse
- EMI reduction circuitry
- Event Detectors
- Synchronous counter
