74VHC74MTC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 55.3mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2014 |
| Series | 74VHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 3.3V |
| Base Part Number | 74VHC74 |
| Function | Set(Preset) and Reset |
| Number of Outputs | 4 |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 2 |
| Load Capacitance | 50pF |
| Output Current | 8mA |
| Clock Frequency | 115MHz |
| Propagation Delay | 18 ns |
| Quiescent Current | 2μA |
| Turn On Delay Time | 4.6 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Output High, Low | 8mA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 9.3ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Height | 900μm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74VHC74MTC Overview
It is embeded in 14-TSSOP (0.173, 4.40mm Width) case. Package Tubeembeds it. Currently, the output is configured to use Differential. It is configured with the trigger Positive Edge. There is an electric part mounted in the way of Surface Mount. Powered by a 2V~5.5Vvolt supply, it operates as follows. It is at -40°C~85°C TAdegrees Celsius that the system is operating. D-Typeis the type of this D latch. It is a type of FPGA belonging to the 74VHC series. Its output frequency should not exceed 115MHz. There are 14 terminations,The 74VHC74 family contains it. A voltage of 3.3V is used to power it. Its input capacitance is 4pF farads. The electronic device belongs to the AHC/VHC/H/U/Vfamily. There is an electronic part that is mounted in the way of Surface Mount. A total of 14pins are provided on this board. This device has Positive Edgeas its clock edge trigger type. This part is included in FF/Latches. It reaches 5.5Vwhen the supply voltage is maximal (Vsup). It is imperative that the supply voltage (Vsup) is maintained above 2Vin order to ensure normal operation. As a result of its reliable performance, this T flip flop is suitable for RAIL. Featuring the maximum design flexibility, it has an output current of 8mA . It consumes a total of 2μA quiescent current at any given time. Currently, there are 2 channels available.
74VHC74MTC Features
Tube package
74VHC series
14 pins
74VHC74MTC Applications
There are a lot of ON Semiconductor 74VHC74MTC Flip Flops applications.
- ATE
- Instrumentation
- Bounce elimination switch
- Safety Clamp
- Bus hold
- Buffer registers
- Synchronous counter
- Event Detectors
- Digital electronics systems
- Frequency division
