74VHCT273ATTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74VHCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74VHCT273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Clock Frequency | 160MHz |
| Propagation Delay | 9.2 ns |
| Turn On Delay Time | 6.8 ns |
| Family | AHCT/VHCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 9.2ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 6pF |
| fmax-Min | 65 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 45000000Hz |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74VHCT273ATTR Overview
It is packaged in the way of 20-TSSOP (0.173, 4.40mm Width). It is included in the package Tape & Reel (TR). It is configured with Non-Invertedas an output. This trigger uses the value Positive Edge. There is an electric part mounted in the way of Surface Mount. With a supply voltage of 4.5V~5.5V volts, it operates. The operating temperature is -55°C~125°C TA. This electronic flip flop is of type D-Type. The 74VHCTseries comprises this type of FPGA. A frequency of 160MHzshould not be exceeded by its output. A total of 1 elements are present. As a result, it consumes 4μA of quiescent current without being affected by external factors. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. If you search by 74VHCT273, you will find similar parts. A voltage of 5V is used as the power supply for this D latch. Input capacitance of this device is 6pF farads. A device of this type belongs to the family of AHCT/VHCT. A part of the electronic system is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. This device has the clock edge trigger type of Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. This flip flop is designed with 8 Bits. The superior flexibility is achieved through the use of 8 circuits. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TAPE AND REEL. There are 5V power supplies attached to it. A high level of efficiency can be achieved by maintaining the supply voltage at 5V.
74VHCT273ATTR Features
Tape & Reel (TR) package
74VHCT series
20 pins
8 Bits
5V power supplies
74VHCT273ATTR Applications
There are a lot of STMicroelectronics 74VHCT273ATTR Flip Flops applications.
- Balanced 24 mA output drivers
- Supports Live Insertion
- Latch-up performance
- Data Synchronizers
- Parallel data storage
- Reduced system switching noise
- Latch
- Single Down Count-Control Line
- Balanced Propagation Delays
- Modulo – n – counter
