AAT2550ISK-CAA-T1
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-VFQFN Exposed Pad |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Additional Feature | ALSO REQUIRED ADAPTER VOLT OF 4V TO 5.5V |
| Subcategory | Power Management Circuits |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | unknown |
| JESD-30 Code | S-XQCC-N24 |
| Qualification Status | Not Qualified |
| Output Voltage | 600mV |
| Power Supplies | 3.6V |
| Number of Channels | 3 |
| Interface | Serial |
| Min Supply Voltage | 2.7V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Current | 600mA |
| Adjustable Threshold | YES |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.07mA |
| Fault Protection | Over Current, Over Temperature, Over Voltage, Short Circuit |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Switching Frequency | 1.4MHz |
| Programmable Features | Current |
| Current - Charging | Constant - Programmable |
| Charge Current - Max | 1A |
| Battery Pack Voltage | 4.2V |
| Length | 4mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
AAT2550ISK-CAA-T1 Overview
The package Tape & Reel (TR) contains it, and you can find it there.Located in package 24-VFQFN Exposed Pad, it can be found there.Surface Mount is the mounting type of the device.The best way to adjust the temperature is to set it to -40°C~85°C TA.To operate the device, an analog IC called POWER SUPPLY SUPPORT CIRCUIT is used.To charge the device, a current of Constant - Programmable is required.Among its terminations, there are 24.Hence, the battery pack is at 4.2V when it comes to voltage.The unit is equipped with a number of programmable features, including Current.When charging current is maximum, it is rated at 1A.There are 3 channels available for this application.It should be possible to run it from a 3.6V battery it should be able to run at all times.The possibility of optimal efficiency exists if 600mV output voltage is used as the output voltage.It is in this instance that the device's output current is set to 600mA.Devices in this category are classified as Power Management Circuits.It can function at as low a supply voltage as possible, such as 2.7V.Amounting is in line with Surface Mount.During the design process, Vsup (maximum supply voltage) was set to 0.07mA.3.6V is the power supply setting for the part.A minimum input voltage of 2.7V volts is required for this device.A switching frequency of 1.4MHz is present in the part.Voltage input can be as low as 5.5V volts at its maximum.It is also possible to generate additional features with this device that are similar to those of ALSO REQUIRED ADAPTER VOLT OF 4V TO 5.5V.
AAT2550ISK-CAA-T1 Features
Battery pack voltage of 4.2V
3 channels
Power Management Circuits subcategory
Switching frequency of 1.4MHz
Addtional features of ALSO REQUIRED ADAPTER VOLT OF 4V TO 5.5V
24-VFQFN Exposed Pad package
AAT2550ISK-CAA-T1 Applications
There are a lot of Skyworks Solutions Inc. AAT2550ISK-CAA-T1 Battery Chargers ICs applications.
- Fast charge
- Boat
- Robot
- Smart speakers
- Energy harvesting
- Electric lift car
- Electric boat
- Power tools
- Model aircraft
- Shop charger
