AAT3190ITP-1-T1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-TFSOJ (0.094, 2.40mm Width) |
| Number of Pins | 12 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| Type | DC DC Controller |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | J BEND |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 1MHz |
| Number of Outputs | 2 |
| Max Supply Voltage | 5.5V |
| Output Current | 30mA |
| Voltage - Output | ±25V |
| Topology | Switched Capacitor (Charge Pump) |
| Control Mode | VOLTAGE-MODE |
| Max Input Voltage | 5.5V |
| Internal Switch(s) | No |
| Voltage - Supply (Min) | 2.7V |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AAT3190ITP-1-T1 Overview
On the board, there is also a 12-TFSOJ (0.094, 2.40mm Width) package that saves space.For the design of these LED drivers, 2 outputs are used.The mounting method is Surface Mount.It emerges as a DC DC Controller with high efficiency.If the led driver ic is set to -40°C~85°C TA, it will work normally.The system operates at a frequency of 1MHz.In order for it to operate, it has 12 terminations.There are 12 pins on the base of this LED driver.Failures may occur if the voltage supply is below 2.7V.On the Surface Mount, a device is mounted.5.5V is an acceptable maximum value for the supply voltage.The output voltage is ±25V.As a result of its characteristics, it is also classified as Switching Regulator or Controllers.5.5V is the maximum value of the supply current.30mA is the maximum amount of current that can be supplied to the load.
AAT3190ITP-1-T1 Features
Available in the 12-TFSOJ (0.094, 2.40mm Width) package
Operating temperature of -40°C~85°C TA
Frequency of 1MHz
Supply voltage of 5V
AAT3190ITP-1-T1 Applications
There are a lot of Skyworks Solutions Inc. AAT3190ITP-1-T1 LED Driver ICs applications.
- High-end retail lighting
- Replacement lamps
- Industrial LED Lighting: Image Recognition Devices
- Flicker-free LED Lighting using R1580N
- Linear fluorescent
- Architectural lighting
- Dimmable LED for vehicle interiors
- Medical surgery lighting
- A- lamps
- Stage Lighting and Signage
