ADF4193BCPZ-RL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-WFQFN Exposed Pad, CSP |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Type | Clock/Frequency Synthesizer (RF) |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | PLL or Frequency Synthesis Circuits |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~3.3V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADF4193 |
| Output | Clock |
| Pin Count | 32 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3V |
| Power Supplies | 3V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Circuits | 1 |
| Operating Supply Current | 68mA |
| Nominal Supply Current | 30mA |
| Frequency (Max) | 3.5GHz |
| Supply Current-Max (Isup) | 27mA |
| Input | CMOS, TTL |
| Ratio - Input:Output | 2:1 |
| PLL | Yes |
| Differential - Input:Output | Yes/No |
| Divider/Multiplier | Yes/Yes |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADF4193BCPZ-RL7 Overview
A clock integrated circuit is packaged in a Tape & Reel (TR)-shaped package because it is for use as a clock. Embedded in the 32-WFQFN Exposed Pad, CSP package is this Clock PLL. The frequency generator is capable of withstanding a maximum temperature of 260 during reflowing. There are 32 terminations found in the file. Basically, this time clock generator needs a voltage of 3V. As the Clock PLL's input, CMOS, TTL is designed to be used in order to generate the clock signal. For a full understanding of the electronic part's performance, 1 circuits are implemented. This clock-based frequency generator provides a frequency up to 3.5GHz Max. This component can be conveniently installed on the panel thanks to the Surface Mount. The supply voltage for this frequency synthesizer should be kept above 2.7V for safety considerations. As long as there are 2.7V~3.3V supply voltages provided, clock generator ic should work. Based on test statistics, ambient temperature should be set at -40°C~85°C. The RF synthesizer is compatible with Clock logic levels. As far as electrical parts go, this component can be classified as a Clock/Frequency Synthesizer (RF) component. It is a 32-bit IC that is designed for microprocessors specifically. It is possible to find its related electronic parts by searching for the base part number ADF4193. There is an available 32 pin on the PLL. There is a maximum supply voltage of 3V that clock generator can handle. In general, this clock PLL is considered a PLL or Frequency Synthesis Circuits device. For the clock time generator to function properly, 68mA of supply current must be provided. There should be no more than 27mA of supply current for this time clock generator.
ADF4193BCPZ-RL7 Features
Available in the 32-WFQFN Exposed Pad, CSP
Supply voltage of 3V
Operating supply voltage of 3V
ADF4193BCPZ-RL7 Applications
There are a lot of Analog Devices Inc. ADF4193BCPZ-RL7 Clock Generators applications.
- Digital HDTV systems
- Precision auxiliary angle deflection measurement
- Myriad digital applications
- Televisions
- Modems
- Walkie-talkies
- Radar
- Microwave backhaul IF
- Digital logic circuits
- Clock generation systems
